Shopping Cart
Your Cart is Empty
Speak to us on 0121 554 2727 - We are open for appointments
Speak to us on 0121 554 2727 - We are open for appointments
Your Cart is Empty
At Manna Jewellers, we buy or part-exchange unwanted jewellery pieces, subject to inspection and valuation and buy and sell Gold Bullion.
BUYING & SELLING JEWELLERY
At Manna Jewellers, we buy or part-exchange unwanted jewellery pieces, subject to inspection and valuation and buy and sell Gold Bullion.
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
November 20, 2026 7 min read
A ring that fitted perfectly at the time of purchase can feel loose years later. Weight change, seasonal variation, and even just ageing can alter your finger size enough to make a previously snug ring slip around, sit off-centre, or feel genuinely at risk of coming off. When that happens, two paths are usually suggested: a ring adjuster for loose rings, or proper resizing. The right one depends on how the ring is made, how significant the size difference is, and what you want from the result.
Manna Jewellers in Birmingham's Jewellery Quarter carries out ring resizing in its on-site workshop. To understand the full scope of repair and alteration work available, the jewellery repairs page covers what is offered in-house.
A ring adjuster for loose rings is a temporary fix, not a permanent solution, and works best for plain bands with no stones set in the lower shank.
Ring adjusters work by reducing the ring's internal circumference, typically using a metal coil or silicone insert fitted inside the band.
Proper resizing removes a small section of the shank and re-solders it to reduce the ring's diameter. The join is not visible once polished.
If a ring is more than one full size too large, a ring adjuster often won't provide a reliable fit and can make the ring sit unevenly.
Rings with pavé-set stones, channel settings, or decorative elements around the full band may not be suitable for traditional resizing.
Making a ring smaller at home with tape or thread is not recommended for gold rings. These materials can catch on the gold surface and cause scratches.
Knowing your current ring size accurately is the starting point for any adjustment decision. A finger size guide can help you measure at home before visiting a jeweller.
Ring adjusters sit inside the band. The most common type is a small metal spiral coil that wraps around part of the inner circumference, reducing the internal diameter without touching the outside of the ring. Silicone insert versions do the same job with a soft lining. Both are sold as universal fits, and both are designed to be fitted and removed by hand.
For a plain gold band that is half a size too large, an adjuster can work reasonably well temporarily. It is worth knowing they are not invisible from certain angles, and they can trap moisture and debris between the coil and the gold, which needs regular cleaning. For rings worn occasionally, that may not matter. For something worn every day, like a wedding band or engagement ring, the limitation shows over time.
Ring adjusters are also less effective on wider bands. A wide shank makes more contact with the finger, and an adjuster coil on a wide band can create pressure points that become uncomfortable after a few hours.

Resizing is the permanent solution. A goldsmith removes a small section of the shank, pulls the two ends together to close the gap, and solders the join at the correct temperature for the gold's carat. The ring is then polished so the join is flush with the rest of the band.
For plain gold wedding bands, this is straightforward. For rings with stone settings, the goldsmith assesses whether the design can be altered without compromising the setting's structural integrity. Most solitaire engagement rings and standard wedding bands can be resized without issue. Eternity rings, which have stones running all the way around the shank, cannot be resized by the standard method and require a different approach.
Resizing is usually right when the ring is more than one size too big, has sentimental or monetary value and needs a reliable, permanent fit, or will be worn daily. An adjuster would not give a consistent result. The repair price guide gives indicative costs for resizing by metal type before you visit. If you want to bring a ring in for an assessment before committing, book an appointment at the Jewellery Quarter workshop.
|
Method |
Best for |
Limitations |
Cost range |
|
Metal coil adjuster |
Plain band, up to 1 size too big |
Not permanent, traps debris, can be visible |
£5-£15 (DIY) |
|
Silicone ring insert |
Occasional wear rings, wider bands |
Less precise fit, may discolour with heat |
£3-£10 (DIY) |
|
Professional resizing |
All ring types worn daily |
Not all ring designs are resizable |
£40-£150+ |
|
Sizing beads |
Plain band, minor fit issue |
Only reduces size slightly, not for wider bands |
£30-£60 (workshop) |
Sizing beads are small metal balls soldered to the inside of the lower shank. They reduce internal diameter slightly without cutting and re-soldering the full shank. For a ring that is a quarter to half a size too large, they are a minimal-intervention option that works well on plain bands.
Methods that come up online for making a ring smaller at home include clear tape, thread wrapping, or silicone inserts. For gold rings, tape and thread are not advisable. Thread fibres catch on the metal surface of the shank and can scratch the gold over time. Tape adhesive leaves residue inside the band that is difficult to remove without specialist cleaning. Silicone inserts are safer for the ring surface and work well enough for temporary use.
The bigger issue with home methods is that they address comfort without addressing fit. A ring that moves around on the finger, even with a temporary adjuster inside, is still at risk of slipping off in cold water, in the shower, or when hands contract in the cold. For rings with significant value, the question is whether the convenience of a DIY fix outweighs the risk of losing the piece.

Some ring designs resist standard resizing. Full eternity rings are the clearest example. Because the stones continue around the full circumference, there is no plain section of shank to cut. Some jewellers can shorten the band by removing a stone and rebuilding the channel, but this requires specialist work and not all workshops will take it on. Tension-set rings, where the stone is held by pressure rather than prongs, can lose their setting integrity if the shank is altered without careful planning.
For rings in this category, a fitted ring adjuster or sizing beads are usually the practical options. A goldsmith can advise on which approach is least likely to affect the design. The jewellery repairs page covers the work carried out in Manna's workshop, and the team can assess a specific ring and give a direct answer.
Professional resizing for a plain gold band typically costs between £40 and £80 for 9ct gold and £55 to £100 for 18ct gold. More complex rings with stone settings or decorative shanks cost more because the goldsmith needs to work around the design. Sizing beads are a lower-cost option, around £30 to £60, and suit rings that only need a minor reduction. Any reputable workshop will give a written quote before work begins. The repair price guide has indicative costs for Manna's services.
A ring adjuster fits inside the band. The metal coil type wraps around part of the inner surface, reducing the internal circumference so the ring grips the finger more firmly. Silicone inserts line the lower inside of the band and work on the same principle. Neither type alters the ring itself. They can be fitted and removed without tools and are reusable. They work best when the ring is half a size to one size too large and when the band is a plain, relatively narrow style.
Most plain gold bands can be resized. Standard solitaire engagement rings and plain wedding bands are typically straightforward to resize. Full eternity rings, tension-set rings, and rings with continuous stone settings around the full shank cannot be resized by the standard cut-and-solder method. For rings in these categories, sizing beads or a fitted adjuster are usually the alternative. A goldsmith can assess a specific ring and confirm which options apply before any work is agreed.
Using a silicone ring insert at home is safe for the ring surface. Tape and thread are not recommended for gold rings as they can scratch the finish over time and leave residue that is difficult to clean. The more important risk with home methods is that they create a temporary sense of security while the underlying fit problem persists. A ring that is loose enough to need an adjuster is loose enough to slip off in cold water or when hands contract quickly. For rings with significant value, a professional assessment is a more reliable solution.
A well-fitted ring should slide over the knuckle with mild resistance and sit snugly on the finger below without leaving a constant mark or restricting circulation. If the ring slides off with no resistance when the hand is relaxed, it is too big. If it moves freely and spins so the stone faces the palm, that is also a sign of a size issue. The finger size guide explains how to measure your ring size accurately at home before visiting a jeweller.
Ring resize cost UK: what to expect in 2026: covers the full cost breakdown for resizing by metal type and direction, with guidance on how many sizes a ring can safely go up or down before the structure is affected.
How to care for your wedding ring: covers daily habits that slow down wear, what to avoid when wearing a gold band, and how to keep the finish looking its best between professional services.
Finger size guide: explains how to measure your ring size accurately at home and what to do when your size falls between two standard UK sizes, useful context before deciding whether to resize.
The Manna Jewellers Team has been helping customers find, design, and create meaningful jewellery for over 40 years. Based in Birmingham's Jewellery Quarter, our in-house team of trained craftspeople combines generational knowledge with hands-on expertise, so the advice we offer reflects what we actually do, every day.
November 17, 2026 6 min read
Read MoreNovember 13, 2026 7 min read
Read More